Hong Kong · B2B Wholesale · 3D Printing Materials

PLA filament that prints the same on spool one and spool one hundred.

Wood Touch International supplies 1.75 mm PLA filament to distributors, print farms, schools and resellers — tightly wound, diameter-checked and vacuum-sealed, in a colour range built for repeat orders.

Browse the range Request a quote
⌀ 1.75 mm Tolerance ±0.02 mm 1.5 kg spools · A2 Vacuum-sealed + desiccant OEM / private label
A stack of PLA filament spools in red, yellow, green, orange and blue
Black — PLA In the enquiry builder below · 1.5 kg · 1.75 mm · A2 spool
Colour range

Ten stocked colours. One consistent melt.

Every colour in the stocked range runs the same base resin and the same print window, so switching spools never means re-tuning a profile. Pick a colour to see it up close — and add it straight to your enquiry.

Black

#1B1B1D · PLA · 1.5 KG · A2 SPOOL

Deep, neutral black for functional parts, enclosures and brackets — the highest-volume colour in the range.

The range

Three PLA lines, one standard of winding.

All lines share the same 1.75 mm diameter control, neat-wind spools and moisture-protected packing. Pricing is by quantity — add lines to your enquiry and we quote the full order together.

A 1.5 kg spool of black PLA Basic filament
Everyday workhorse

PLA Basic

The all-rounder for prototyping, education and production printing. Clean, glossy finish, low warp, and the full ten-colour stocked range.

  • ⌀ 1.75 mm · ±0.02 mm
  • Nozzle 190–220 °C · Bed 0–60 °C
  • 1.5 kg · A2 spool · 33 × 33 × 15 cm · 10 colours
Wholesale pricing by quantity
A 1.5 kg spool of matte grey PLA filament
Low-sheen finish

PLA Matte

A soft, chalky surface that hides layer lines and photographs beautifully — made for product models, display pieces and architectural work, in the stocked ten-colour range.

  • ⌀ 1.75 mm · ±0.02 mm
  • Nozzle 190–220 °C · Bed 0–60 °C
  • 1.5 kg · A2 spool · 33 × 33 × 15 cm · 10 colours
Wholesale pricing by quantity
A 1.5 kg spool of rainbow silk PLA filament with a glossy colour gradient
High-gloss silk

PLA Silk

A mirror-smooth, metallic-look finish for gifts, décor and display models, in the stocked ten-colour range — including the rainbow gradient.

  • ⌀ 1.75 mm · ±0.02 mm
  • Nozzle 200–230 °C · Bed 0–60 °C
  • 1.5 kg · A2 spool · 33 × 33 × 15 cm · 10 colours
Wholesale pricing by quantity
Technical data

The numbers buyers check first.

One specification sheet covers all three lines. If your procurement team works to its own standard, send it with your enquiry and we will match against it line by line.

Material
PLA (polylactic acid)Made from fermented plant starch — the easiest-printing, lowest-warp FDM material.
Diameter
1.75 mm · tolerance ±0.02 mmContinuously monitored during extrusion; ovality checked per batch.
Nozzle temperature
190–220 °C (Silk: 200–230 °C)
Bed temperature
0–60 °CPrints on an unheated bed; 50–60 °C improves first-layer hold on large parts.
Density
≈ 1.24 g/cm³One 1.5 kg spool carries roughly 503 m of filament.
Spool size
A2 spool · 1.5 kg net per spoolEach spool measures 33 × 33 × 15 cm. Sample spools on request — ask in your enquiry.
Packing
Vacuum-sealed with desiccantIndividual carton per spool; export cartons for pallet orders.
Storage
Cool, dry, sealedRe-seal with desiccant after opening; dry at 45 °C if a spool has absorbed moisture.

Spool estimator

Tell us how much plastic a job uses and we will work out the filament it takes.

84 mof 1.75 mm filament
11.5 kg spool(s) needed

Based on PLA density 1.24 g/cm³ (≈ 2.98 g per metre; ≈ 503 m per 1.5 kg spool). Add 5–10% for brims, supports and failed first layers.

Quality control

Checked four times before a spool is sealed.

Most print failures blamed on printers trace back to filament: diameter drift, moisture, tangles. Our checks target exactly those three.

Stacks of vacuum-sealed PLA filament spools ready for dispatch
Finished spools, vacuum-sealed with desiccant and ready for export cartons.
01

Diameter, watched continuously

Filament diameter is measured along the full length of every run, and any length outside ±0.02 mm never reaches a spool.

02

Neat winding, no cross-overs

Spools are wound under controlled tension in a single ordered layer pattern, so filament feeds tangle-free from the first metre to the last.

03

Dried, then sealed the same day

Finished spools are dried and vacuum-sealed with desiccant immediately, so they arrive at the moisture level they were packed at.

04

Batch traceability

Every spool carries its batch code. If a print farm reports an issue, we can trace the spool back to its production run and check retained samples.

OEM · Private label

Your brand on the spool. Our filament inside.

Resellers and printer brands can take any line in the range under their own label — same filament, same quality checks, your packaging.

STEP 01

Samples first

Order sample spools of the lines and colours you want to carry, and test them on your own printers before committing.

STEP 02

Label & carton proof

Send your artwork; we proof spool labels and carton print against the physical pack so colours and barcodes are right before production.

STEP 03

Production & export

Your order is produced, batch-coded and packed for export from Hong Kong, with pallet and carton quantities confirmed up front.

Wood Touch International is a Hong Kong company focused on one material done properly: PLA filament for people who print at volume — distributors, print farms, schools and brands. We would rather sell three lines we can keep consistent than thirty we cannot.

Request a quote

Build your enquiry.

Add the lines and colours you are interested in, set quantities in spools, and add your details. The builder turns it into a clean enquiry and opens it in your email app, addressed to our sales team at 3dcraft2009@gmail.com — just press send.

Your enquiry list

Nothing here yet — add a product or a colour from the sections above.

Your details

“Send enquiry by email” opens your email app with the enquiry pre-filled and addressed to 3dcraft2009@gmail.com — or copy / download the text and send it to that address yourself. Quotes cover product, packing and freight options together.

Questions

Before you ask for a quote

Trial orders can start from a single export carton so you can test the filament on your own machines. Volume pricing improves with quantity — include your target quantity per colour in the enquiry and the quote will show the tiers.
Yes. Add “Sample spools” in the enquiry builder and list the lines and colours you want to test. Samples are the same production filament as bulk orders — never a special batch.
Yes — custom colours can be matched from a Pantone reference, a physical sample or a printed part. Custom colours carry a higher minimum quantity than stocked colours; send the reference with your enquiry.
Each spool is vacuum-sealed with desiccant in its own carton, and export cartons are packed for palletised sea or air freight from Hong Kong. The vacuum seal is what protects the filament in transit — a spool that arrives with a broken seal should be flagged to us right away.
Yes — spool labels and cartons can carry your artwork, with barcode and batch coding retained. See the private label steps above, or add “OEM / private label” to your enquiry list.